How do I reset my Kwikset SmartCode 914? |

Kwikset has been making locks since 1899, and its SmartCode 914 is the perfect combination of convenience and security. This electronic lock uses Bluetooth to communicate with your smartphone, so you can unlock it using just one touch. To reset it after a power outage or battery replacement, be sure to use a flat screwdriver as well as Kwikset’s instructions here.

The “kwikset smartcode 914 reset master code” is a question that has been asked many times before. The answer to the question, is that you need to find your Kwikset SmartCode 914’s master code, and then enter it into the keypad on the back of the lock.

Originally published on June 17, 2019

1. Battery should be removed.
2. Keep the program button pressed.
3. Replace the battery.
4. Keep the program button pressed for 30 seconds.
5. When you hear a beep, release the program button.
6. Wait until the lock flashes red twice.
7. ‘Click the Program button again’
8. Green and red lights flash, then the lock re-hands. Category.

How can I alter the code on my Kwikset SmartCode 914 in light of this?

Keep the door ajar. Once, press the Program button. You will hear five beeps and the Checkmark will flash five times.

1. Check to see whether the door is open. Once, press the Program button.
2. Once, press the checkmark icon.
3. Fill in the user code.
4. Once, press the lock sign.

What is the procedure for resetting a Kwikset? By removing the lock’s cover and then the lock’s battery pack, you may reset your Kwikset Z-Wave Lock to factory settings. Then hold down the “Program” button for a few seconds. As you reapply power to the lock, keep the button pressed. Then wait a few moments and push the button one more to reset.

How can I reset my Kwikset SmartCode 916 in this case?

Deadbolt from the Kwikset SmartCode 914 Series. SmartCode 916 Touchscreen Electronic Deadbolt by Kwikset. To reset a Z-Wave device, follow these steps. Kwikset is a lock made by Kwikset.

1. Remove the battery cover from the battery.
2. Once, press the “A” button.
3. After the lock has been excluded, hit the “A” button once again.

What is the Kwikset master code?

0-0-0-0 is the default Mastercode. It is suggested that you adapt it to your own code.

Answers to Related Questions

What is the procedure for factory resetting my Kwikset SmartCode 909?

How can I get my Signature Series or SmartCode Deadbolt back to factory settings? Reset the device to factory settings.

1. Take out the battery pack.
2. While reinserting the battery pack, press and hold the Program button.
3. Once again, press the Program button.
4. Repeat the door handing operation to educate the lock the door’s orientation.

What is the procedure for resetting a Kwikset 913 Deadbolt?

HOLD the Program button down until the keypad turns green (about 5 seconds). 2. Once again, Lock the door by pressing the lock button.

What is the procedure for resetting a smart door lock?

To reset your Smart Lock through the settings, open the Nuki app and tap on the Smart Lock you want to reset. Select “Manage Smart Lock” and then “Factory Reset” from the drop-down menu.

What is the procedure for factory resetting my Kwikset 910?

To conduct a factory reset, follow these steps:

1. Remove the batteries from the system.
2. On the keypad, press and hold the lock button.
3. Replacing the batteries (while still holding the button)
4. Over the course of around 15 seconds, the lock will beep three times. Release the button after the third beep.

What is Kwikset SmartCode, and how does it work?

The SmartCode touchpad electronic deadbolt is a motorized deadbolt with one-touch locking. You can enter your house with the convenience of keyless entry with your own code, and the back-lit keypad gives improved visibility. SmartCode is simple to set up, program, and use and runs on four AA batteries.

On a Kwikset Powerbolt 2, how do you reset the code?

How can I get my Powerbolt 2’s default settings back? Reset the device to factory settings.

1. Check that the door is both open and unlocked.
2. Set the Mastercode to the default (O-O-O-0).
3. Lock the door by pressing the lock button.
4. Press 0.
5. Lock the door by pressing the lock button.
6. Test the lock: With the door open and unlocked, Lock the door by pressing the lock button.

What is the procedure for changing my Kwikset code?

Step-by-Step Instructions for Changing the Code

Remove the two screws on either side of the inner side of the Kwikset SmartCode assembly using an Allen wrench. To prevent harming the lock assembly, proceed with caution. Press the “Program” keypad button on the inner side of the door when the door is open.

On a Kwikset Smartcode 910, how do you reset the code?

While reinserting the battery pack, press and hold the Program button. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red. Once again, press the Program button. When the LED flashes green and you hear one beep, the lock has been reset.