Toilets are designed to sit flush against the wall of a room, but sometimes they stick out further than desired. This can be problematic when you have limited space around your toilet and no place for an extra bit of length from the side or top.
A wall-hung toilet is a type of toilet that hangs from the wall, not sitting on the floor. They are typically more expensive to install, but they can be an attractive option for some people. The “wall-mounted toilet pros and cons” will help you decide if this type of toilet is right for your home.
15 inches to 19 inches
How far does a toilet protrude from the wall here?
12 inches from the rear wall, or 12-1/2 inches from the center of the flange to the wall frame, is the usual distance. The space between the toilet and the facing wall or fixture must be at least 21 inches.
Second, how do you install a wall-mounted toilet? How to Install a Toilet on the Wall
- Adjust the bracket’s feet to the correct height and place the frame against the wall.
- Mark and drill the appropriate mounting holes for the frame on the wall and floor.
- Connect the waste line from the toilet to the sewer.
- If the tank isn’t already attached to the frame, do so now.
Is it possible for me to have a toilet that hangs on the wall?
We’ve been installing wall-hung toilets for many years and have a lot of experience with them. A toilet that is hung on the wall has no touch with the floor, and instead of mounting to the floor in your bathroom, the wall-hung pan will float above it since it is fixed to the wall.
Is it true that toilets that are mounted on the wall are better?
One of the most fundamental advantages of wall-mounted toilets is that they conserve space on the floor. They’re an excellent choice for tiny bathrooms, and the fact that they’re somewhat raised above the ground level adds to the feeling of space.
Answers to Related Questions
Is the distance between the toilet and the wall the same for all toilets?
Begin by taking a measurement from the toilet’s back wall to the middle of the bolts at the base. A conventional toilet will not fit if the rough-in dimension is not between 11 and 13 inches, and you will need to hunt for a toilet made for that exact rough-in distance.
What is the minimum toilet clearance?
Clearances for Users
The National Kitchen & Bath Association requires at least 24 inches clearance in front of a toilet. Moreover, the NKBA recommends 32 inches from the center of the toilet waste line to the center of that of any other sanitary fixture, although local codes may require only 30 inches.
In a bathroom, where should a toilet be placed?
From the completed floor to the top of the bowl, a normal toilet is 14 to 15 inches tall (excluding the fold-down seat). If you anticipate on living into your elderly years, a wall-mounted toilet with a height of 16 to 18 inches is a good choice.
What is the width of a toilet bowl?
Dimensions of the average toilet
The total height of a one-piece gravity toilet may range from 53 to 78 cm, with a 14″ – 16″ (356 – 406 mm.) space between the floor and the bowl rim. The depth is normally between 27″ and 30″ (686 – 762 mm) while the breadth is seldom more than 20 in (508 mm).
What is the depth of a vanity?
The usual depth of a vanity is 21 inches. In a tiny bathroom, though, you may increase floor space by cutting at least part of the vanity to 18, 15, or even 12 inches deep.
What is the difference between a rough-in toilet number 10 and a rough-in toilet number 12?
Those figures represent the distance between the wall and the closet flange’s center (aka, where the johnny bolts that secure the toilet bowl go). Most toilet bowls will operate with a 10′′ or 12′′ distance, however a 10′′ rough tank is narrower to accommodate the shorter spacing.
What is the length of a toilet paper roll?
The individual sheets that combine to produce one roll of toilet paper were previously 4.5 inches broad and 4.5 inches long. However, that norm has moved, or at the very least weakened, to the point that firms are now offering sheets that are a half-inch shorter or thinner, or both.
What is the maximum weight capacity of a wall-hung toilet?
a thousand pounds
How effectively do wall-mounted toilets flush?
The Kohler Veil dual-flush toilet is the most expensive of the three wall-mounted toilets we examined, but it effectively eliminates solid waste and cleans the bowl. However, it does not have the same level of odor and stain resistance as other versions. The bowl, according to Kohler, saves up to 12 inches of space when compared to the manufacturer’s floor mounts.
Is it necessary for a toilet to be flush with the wall?
No, there isn’t a defined distance between a toilet tank and the wall. The most frequent rough in distance is 12″, with a couple at 10″ and a few at 14″, however the actual distance between the tank and the wall may vary. Yours is a typical situation.
What is the ideal height for a wall-hung toilet?
If your tank is built within a wall, you may be limited by the inside of the wall. Choose between a conventional toilet height and a “comfort” or “universal” toilet height. The height of a standard toilet is 14 1/2 inches from the floor to the lip of the bowl, not counting the seat.
Which wall-hung toilet is the best?
Our Best Wall Hung Toilet Recommendations in a Nutshell:
- TOTO Aquai Dual-Flush Wall-Hung Toilet (Top Pick)
- Veil Wall-Hung Elongated Toilet Bowl by KOHLER (Top Rated)
- Assisted Wall-Mounted Toilet by American Standard (Editor Choice)
- Toilet EAGO Square Modern Ceramic Wall Mounted
- Starck Duravit Toilet Bowl Wall Mounted
What is the finest toilet wax ring?
The Top 8 Toilet Seals
- DANCO’S NEXT Perfect Seal Toilet Wax Ring
- Extra Thick Wax Toilet Bowl Gasket by Fluidmaster 7513.
- BL01 Waxless Toilet Gasket by Sani Seal Llc.
- Fernco Inc. is a company that specializes in the production of is a company that specializes in the production of
- 7530P8 Universal Better Than Wax Toilet Seal by Fluidmaster.
- 6000BP Korky Universal Toilet WaxFree Seal
- Fernco Inc. is a company that specializes in the production of is a company that specializes in the production of
How do you plum a toilet that hangs on the wall?
How to Install a Toilet on the Wall
- Adjust the bracket’s feet to the correct height and place the frame against the wall.
- Mark and drill the appropriate mounting holes for the frame on the wall and floor.
- Connect the waste line from the toilet to the sewer.
- If the tank isn’t already attached to the frame, do so now.
What is the maximum weight capacity of a wall-hung toilet in the United Kingdom?
A correctly fitted frame and wall-hung toilet should be able to hold 200kg (30 stone) or more comfortably.
What’s the best way to get more water in the toilet bowl?
Steps
- Remove the cover from the toilet tank.
- Keep an eye on the amount of water in the tank.
- Turn off the toilet’s water supply.
- Check the float and the fill valve.
- Examine the float height in the toilet tank.
- To adjust the float height, use a screwdriver.
- To check the water level, flush the toilet.
What factors should I consider while purchasing a toilet bowl?
Advice on Purchasing a New Toilet
- Select the appropriate toilet height.
- Consider dual-flush toilets and water-saving toilets.
- Choose between a two-piece and a one-piece toilet.
- Pick a bowl form that complements your bathroom.
- Recognize the various flushing processes.
By Olivia GrilHey Folks! I'm Olivia from California, United States. I'm a blogger, travel lover, I can travel anywhere, whether it's a new place or already visited. I love meeting new people, clicking photos of every movement, and documenting my adventure. I also, write about travel, travel movies, the best places to visit, etc. Read my stories.
