What does 12 inch rough in mean when installing a toilet? |

This is a common question for home owners. The rough-in depth can vary from manufacturer to manufacturer, so it’s best to check with your toilet’s manufacture before beginning any installation process.

The “can you replace a 10 inch rough-in toilet with a 12 inch rough-in toilet” is a question that is asked quite often. The answer to this question is yes, but it will require some extra work on your part.

The gap between the completed wall and the center of the toilet’s floor drain or waste outlet is referred to as the toilet rough-in. The rough-in for most toilets is 12 inches, while it’s not uncommon for older houses to have a smaller rough-in, such as 10″ or 14″.

Also, can a 14-inch rough-in toilet be replaced with a 12-inch rough-in toilet?

For a 14″ rough, any 12″ toilet will suffice. There is just one way for pulling the bowl back 2 inches.

Also, how do you measure the rough in for a toilet? Measure from the wall behind the toilet to the center of the closet bolts that hold your toilet to the floor to determine the rough-in. That distance will very certainly exceed the typical rough-in measurements of 10′′, 12′′, or 14′′. Round down to the closest standard rough-in measurement.

Is it also true that all 12 toilets are rough in?

Because 12 inches is the most common distance, most toilets have a “12-inch rough.” In certain circumstances, particularly in older houses, the outlet is closer to or farther away from the wall. Toilets with a 10-inch rough or a 14-inch rough are available for certain situations.

How far away from the wall should a toilet drain be installed?

Because standard drywall is 1/2 inch thick, the toilet flange should be installed at least 15-1/2 inches from the center of the flange to the wall frame by the plumber. 12 inches from the rear wall, or 12-1/2 inches from the center of the flange to the wall frame, is the usual distance.

Answers to Related Questions

What does a toilet with a 14-inch rough in mean?

The gap between the completed wall and the center of the toilet’s floor drain or waste outlet is referred to as the toilet rough-in. The rough-in for most toilets is 12 inches, while it’s not uncommon for older houses to have a smaller rough-in, such as 10″ or 14″. Rear-outlet toilets are configured a bit differently.

What is the difference between a rough-in toilet number 10 and a rough-in toilet number 12?

Those figures represent the distance between the wall and the closet flange’s center (aka, where the johnny bolts that secure the toilet bowl go). Most toilet bowls will operate with a 10′′ or 12′′ distance, however a 10′′ rough tank is narrower to accommodate the shorter spacing.

Is it possible to convert a two-piece toilet to a one-piece toilet?

In terms of service life and operation, both kinds of toilets are equivalent, but a two-piece toilet is typically more cheap to replace. Each component is offered separately, allowing you to change the tank or bowl as needed. If a one-piece toilet fails, the complete unit must be replaced.

How much does it cost to get a toilet replaced?

On average, it will cost between $45 and $197 to fix a toilet yourself, or between $130 and $310 to hire a plumber to do it. A plumbing contractor’s hourly rate is from $72 to $82 per hour, without including parts or supplies. Get free quotes from local plumbers.

Is it possible to find a toilet with a 16-inch rough in?

It measures 31 inches from the front of the bowl to the wall when built on a 16-inch rough-in. It takes up the same amount of room as a standard 12′′ rough-in toilet put on a 12′′ rough-in. Second, most other 14-inch rough-in toilets from American Standard, Kohler, and others are over 30 inches long.

What is the approximate size of a normal toilet?

The rough-in dimension of a toilet refers to the distance between the completed wall and the center of mounting holes on the floor flange. Toilets are commonly available in rough-in sizes of 10 inch, 12 inch, or 14 inch.

What is a toilet’s approximate dimensions?

Rough-In Toilet 12 Inch

In bathrooms, a 12 inch rough in is the most frequent measurement. This size lets you to choose from the widest range of bowl shapes and toilet styles.

What are the proportions of a toilet that is at a comfortable height?

In contrast to the typical 15 inches of a conventional toilet, today’s “comfort height” or “proper height” toilets have bowls that are 17 to 19 inches high. Taller persons, the elderly, and those with mobility issues may benefit from the greater bowl height, which may be beneficial to their knees and back.

What is the best way to plumb a bathroom?

Steps

1. Determine where the bathroom plumbing fittings will be installed. You’ll need to decide where your bathtub or shower, sink, and toilet will go.
2. Turn off the house’s water supply.
3. Water lines should be installed.
4. Join the drain lines together.
5. Place the toilet in its proper location.
6. Set up the sink.
7. Install a bathtub and a shower unit.

Can I use an elongated toilet instead of a circular toilet?

Elongated — For added comfort, this toilet features a somewhat longer, egg-shaped bowl. So, in the past, the bad news was that replacing a round-front toilet with an extended toilet would often result in the longer toilet not fitting the area.

In a bathroom, where should a toilet be placed?

From the completed floor to the top of the bowl, a normal toilet is 14 to 15 inches tall (excluding the fold-down seat). If you anticipate on living into your elderly years, a wall-mounted toilet with a height of 16 to 18 inches is a good choice.

Is the distance between the toilet and the wall the same for all toilets?

Begin by taking a measurement from the toilet’s back wall to the middle of the bolts at the base. A conventional toilet will not fit if the rough-in dimension is not between 11 and 13 inches, and you will need to hunt for a toilet made for that exact rough-in distance.